Booting Red Hat Linux into rescue mode.
Red Hat Linux can be booted into rescue mode from the installation CD, or any other boot method instead of the system’s hard drive. This also applies to other versions …
Read MoreAuthor: Andrew Lin
Identifying the kernel version and changing the default boot kernel in RedHat and Centos Linux.
Use the command uname to print system information in Linux. # uname -r 2.6.18-194.32.1.el5 The –r option will print the kernel release. # uname -s Linux -s prints the kernel …
Read MoreNslookup resolves address but ping is unable to resolve hostname on Unix server
I came across this issue on my newly built Solaris 10 server. I was able to ping a remote machine by Ip address, but not by its hostname. This indicated …
Read MoreHow to map to a remote NFS directory from a VMware ESX 4 server.
I ran into this error while trying to mount a NFS directory on a remote server from my Vmware ESX4 server. My Vmware esx server is called esx4-server and the …
Read MoreSun Sparc commands to power on and boot up the server.
Booting up the Sun Sparc M3000 server. After logging into the XSCF console, power on the server. XSCF> poweron -d 0 DomainIDs to power on:00 Continue? [y|n] :y Switch to …
Read MoreCreating RDM to LUN (SAN) mapping on VMware ESX 4, Vcenter.
In the past I have written articles about how to create a RDM to LUN disk mapping for VMware ESX 3. http://www.gamescheat.ca/2009/10/scripts-to-automate-the-process-of-identifying-and-compiling-an-rdm-to-lun-mapping-list-for-vmware-esx-30/ and http://www.gamescheat.ca/2009/10/how-to-identify-and-compile-an-rdm-to-lun-mapping-list-for-vmware-esx-30/ The procedure to identify the path …
Read MoreBooting up Solaris 10 from a SAN replicated LUN on a different Sun SPARC server
The quickest way to recover from a total disaster is to have some sort of replication implemented. There are two different methods of real-time replication, hardware and software. My experiences …
Read MoreHow to get the network card speed in Solaris 9
To determine the network card speed in Solaris 9 use the ndd utility. First list the NIC installed and active on the Solaris 9 server. # ifconfig -a lo0: flags=1000849 …
Read MoreHow to relocate the /export and /export/home filesystems on Solaris 10.
By default Solaris installs the /export and /export/home filesystems in the root zfs pool, if you picked ZFS and not UFS as the filesystem. I wanted to relocate /export and …
Read MoreHow to rebuild a Solaris 10 server using the ZFS Root Pool Snapshots
Solaris 10 has provides the ability to recover from a disk drive failure using ZFS root pool snapshots. The snapshot can also be used to quickly rebuild a new server …
Read More